Ceresit CT16 priming preparation – 3.33L – 5kg
£19.86 +VAT
Manufacturer Ceresit
- consumption from 0.2 to 0.35 l / m 2 depending on the evenness and absorbability of the substrate
- makes plastering easier
- increases the adhesion to the ground
- waterproof
- high covering power
- for painting with a roller or brush
- ready to use
- Description
Description
Ceresit CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the armoured layers within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) and traditional plasters. The paint CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Priming the substrate with the paint CT 16 considerably decreases its absorption, which prevents from too fast drying of the applied products. The fi ne aggregates included in CT 16 make the primed surfaces rough and scratch resistant. As the surface is expanded, it increases the adhesion of the plasters, putties and paints. This product has strong coating properties and makes the substrate effi ciently homogenous, thus preventing from any formation of stains on the coloured acrylic, mineral and silicone plasters.
Ceresit CT 14 or CT 17 should be used for reinforcing the surface of the absorptive substrates and renderings inside and outside the buildings. It is recommended for priming the armoured layers within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) and traditional plasters. The paint CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Priming the substrate with the paint CT 16 considerably decreases its absorption, which prevents from too fast drying of the applied products. The fi ne aggregates included in CT 16 make the primed surfaces rough and scratch resistant. As the surface is expanded, it increases the adhesion of the plasters, putties and paints. This product has strong coating properties and makes the substrate effi ciently homogenous, thus preventing from any formation of stains on the coloured acrylic, mineral and silicone plasters. Ceresit CT 14 or CT 17 should be used for reinforcing the surface of the absorptive substrates.
