![krend silicone tc15](https://antbm.co.uk/wp-content/uploads/2022/08/krend-silicone-tc15-500x500.jpg)
![krend silicone tc15](https://antbm.co.uk/wp-content/uploads/2022/08/krend-silicone-tc15-150x150.jpg)
K REND SILICONE TC 15 25kg
£102.55 +VAT
K Rend Silicone TC 15 is an organic resin, low maintenance render with a textured finish.
- Description
- Additional information
- Features & Benefits
- APPLICATION
Description
Silicone TC is an organic resin render incorporating a Silicone resin emulsion and an Acrylic resin dispersion in a ready to use render. If applied according to the manufacturer’s instructions it can be used on a variety of prepared exterior surfaces to provide an attractive, low maintenance textured finish.
SILICONE TC incorporates the benefits of silicone technology to provide a water repellent final surface which gives excellent protection. The silicone allows water vapour to pass freely through the render whilst allowing the finish to remain weather resistant. Silicone TC contains a biocide to help prevent infection from moulds, yeasts and algae and it has a low susceptibility to soiling and contamination.
Additional information
Size: | 25kg |
---|---|
Coverage: | Silicone TC 15 – largest grain 1.5mm; coverage = approximately 2.5 kg / m2 |
Silicone TC 15 provides a range of benefits.
WATER REPELLENT
Our silicone technology is completely water repellent and fully breathable.
![](https://krend.s3.amazonaws.com/images/features/ColourMatchedIcon.png)
COLOUR RANGE
Silicone TC 15 is available in an extensive range of colours.
READY MIXED
All our silicone render products come mixed and are ready to use.
HAND / MACHINE APPLIED
Silicone TC 15 can be hand or machine applied.
• The temperature of the substrate and surrounding air should be a minimum of 5oC
• Do not apply in conditions of strong sunshine or wind; do not apply onto damp or frozen substrates
• Allow freshly applied render basecoats a minimum of 14 days before work commences
• Prime walls using Primer TC colour co-ordinated to topcoat and allow 24 hours drying time for primer before applying topcoat
• Stir bucket contents thoroughly using a slow speed mixer. A small amount of water can be mixed with the product to achieve the best working consistency
• Apply the product to the thickness of the largest grain size using a stainless steel float; allow to take up slightly.The surface is then rubbed up in a circular motion using a plastic float to create the texture
• Complete continuous surfaces without interruption, working to a wet edge at all times
• Drying times may be prolonged by lower temperatures and/or high humidity
• The fresh render must be protected from rain and from drying too fast